LONGDE / LEAD CONTENT TEST

Longde fastener sample
passes lead content test

This zinc alloy fastener passed the lead content test.

SGS Guangzhou received the fastener sample on November 26, 2021, and issued report CANEC2122219001 on December 2. It lists model YK11228, zinc as the main material and silver-colored metal as the sample description.

The applicant is listed as LONDON HARDWARE JEWELRY CO., LTD., a former name of Longde Hardware. The report shows its former address in Hetian Second Industrial Zone, Hetian Village, Houjie, Dongguan. It lists Marc Fisher-Guess as the buyer and the European Union as the destination.

View lead content results
Page 1 of Longde Hardware's SGS Test Report. The applicant, LONDON HARDWARE JEWELRY CO., LTD., is the former name of Longde Hardware. The former address is still used. The lead content conclusion is passed.
Longde Hardware · SGS report page 1 · Sample and conclusion

01The submitted fastener

The customer selected the test on sample CAN21-222190.001.

Test request CP21-062501 - SZ. The sample arrived on November 26, 2021, and testing ended on December 2, 2021. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch issued the report, signed by Allie Chen.

The report lists China as the country of origin. Page 4 shows the fastener and prints the sample number below the photo.

The silver fasteners submitted by Longde Hardware are shown on page 4 of the SGS report, with the sample number CAN21-222190.001.
Longde Hardware · SGS report page 4 · Submitted fastener

02Lead content results

No lead was detected in the accessible base material. The sample passed.

The report lists CPSIA section 101(a)(2) for lead in accessible substrate materials, including children’s metal jewelry. The lab used CPSC-CH-E1001-08.3 with ICP-OES. The limit was 0.01% by mass, with a method detection limit of 0.002%. The result was ND, which the report defines as not detected below the method detection limit. The conclusion was PASS.

The elemental analysis on the same page reports cadmium as ND, with a method detection limit of 2 mg/kg. The measured nickel content was 6 mg/kg, with a method detection limit of 5 mg/kg. SGS used its in-house method GZTC CHEM-TOP-009-01 with reference to EPA 3050B:1996, also using ICP-OES.

Report number
CANEC2122219001
Sample model
YK11228
Lead
Not detected · Pass
Cadmium
Not detected
Page 2 of Longde Hardware's SGS test report: Lead is not detected, and the conclusion is passed. Cadmium is not detected.
Longde Hardware · SGS report page 2 · Test results

Source: SGS Guangzhou report CANEC2122219001, December 2, 2021. The sample information and findings on this page apply to the submitted fastener.

Updated:

Need to check the test report?

Contact & Quotes