LONGDE / Customization process for “Longde Hardware”

Turn a design idea
into a brief we can quote

Customized hardware starts with a drawing, a physical sample, or a reference diagram. Depending on the purpose, dimensions, quantity, and surface requirements, the design, pricing, and delivery time will also vary. Below, following the six steps of “Longde Hardware”, we will explain what needs to be prepared in each step, what needs to be confirmed, and which changes will affect the subsequent arrangements.

Longde Hardware · Customization ProcessUpdated on November 17, 2026

BEFORE YOU START / Before you begin

For a requirement, it is necessary to clearly state at least five things.

The materials don't need to be perfect at once, but the earlier the key conditions are defined, the fewer times it will be necessary to modify the drawings, models, and re-quote later on.

Use
Whether it's attached to a bag, belt, shoes, or clothing; the points of application and the way it opens and closes.
Size
Key dimensions, tolerances, and clearance of mating parts; the version is indicated on the drawing.
Materials and Surfaces
Surface requirements such as material, color, electroplating, spraying, or aging treatments.
Quantity and Delivery
Quantity per item, color split, packaging, delivery location and time.
Acceptance
Appearance standards, functional tests, assembly requirements, and evaluation methods.

THE PROCESS / Six Steps

From one drawing to a load of goods.

At each step, there are materials to be submitted and results to be confirmed. If the previous step is not confirmed, it usually leads to rework or a new quotation in the next step.

  1. STEP 01 / Submit Requirements

    Make it clear about the purpose, size, and quantity.

    It can start from drawings, physical samples, or reference diagrams. It is necessary to specify the purpose, key dimensions, target quantity, and expected delivery time. Requirements for color, surface treatment, and assembly methods should also be included.

    Incomplete information can still be communicated. “Longde Hardware” will try to determine what can be determined from the existing information, and will list the dimensions, parts, or testing requirements that need to be supplemented. At this stage, it’s not a big problem if there are many issues. However, if key conditions remain empty, it will lead to rework later on.

    Key Points of This StepClarify requirements and information

    “Longde Hardware” Customization Process Diagram: Drawings, Dimensionations, and Requirements List
    “Longde Hardware” Customization Process Diagram · Submitting Requirements
  2. STEP 02 / Project Evaluation

    To determine whether it can be done, and also to figure out how to do it.

    Engineering evaluations take into account the structure, materials, manufacturing methods, mold conditions, and surface treatment requirements. Thin walls, deep cavities, reverse lugs, movable parts, and assembly gaps all affect feasibility and cost.

    The evaluation results are usually a list of items that need to be confirmed: which dimensions need to be supplemented, which structures need to be changed, whether the existing molds can still be used, and whether new molds are required. Only after the customer confirms these conditions can the discussion on the plan begin.

    Key Points of This StepConfirm feasibility and items to be determined

    “Longde Hardware” Customization Process Diagram: Comparison of Engineering Drawings and Part Structures
    “Longde Hardware” Customization Process Diagram · Engineering Evaluation
  3. STEP 03 / Confirming the Plan and Quotation

    The quotation follows the proposal.

    It is necessary to clearly specify the version, structure, materials, surface treatment, acceptance criteria, and packaging methods in the proposal. The quotation should typically be broken down into costs for prototyping, mold costs, and unit prices for bulk orders. The delivery conditions should be listed separately.

    For the same product, changes in materials, modifications to the structure, adjustments to quantity, or increases in appearance requirements will all result in changes in price. When obtaining a quotation, it is important to understand which version it corresponds to; comparing quotes from different suppliers should also be done using the same materials and acceptance criteria.

    Key Points of This StepConfirm the plan, costs, and conditions

    "Longde Hardware" Customization Process Diagram: Proposal Document, Cost List, and Confirmation Check
    “Longde Hardware” Customization Process Diagram · Confirming the plan and quotation
  4. STEP 04 / Prototyping and Verification

    The sample is for the customer to use on their own.

    Create samples according to the confirmation plan, and check the dimensions, appearance, and assembly. The testing methods and criteria shall be determined according to the intended use; if it needs to be tested on bags, belts, or shoes, try it under actual usage conditions as much as possible.

    Before confirming the sample, list all the issues that can be changed at once. If the structure or dimensions are changed after confirmation, it may affect the mold, process, and delivery time. For minor adjustments to color or surface, it is also necessary to reconfirm the consistency of the sample and the batch.

    Key Points of This StepVerify the samples and record the results.

    “Longde Hardware” Customization Process Diagram: Measuring the sample of fasteners using a caliper and checking the dimensions.
    “Longde Hardware” Customization Process Diagram · Prototyping and Verification
  5. STEP 05 / Small batch testing

    Using a small batch of goods to verify the consistency of the batch

    After the sample is confirmed, arrange the trial order in the agreed quantity. The trial order depends on the product, as well as the batch color, surface consistency, packaging method, and delivery arrangements.

    The number of samples is determined based on the product and the order confirmation. There is no standard method for determining the number of samples. Any issues found during the sample testing can be adjusted before mass production begins. If the sample testing is successful, then the mass production will be carried out according to the confirmed samples and processes.

    Key Points of This StepVerifying the execution of small batches

    “Longde Hardware” Customization Process Diagram: Verification of small quantities of accessories and trial order packaging
    “Longde Hardware” Customization Process Diagram · Small Batch Testing Orders
  6. STEP 06 / Batch Delivery

    Produce, inspect, and deliver according to the agreement

    Mass production will proceed according to the confirmed plan. Inspection and packaging will be carried out as agreed. Upon delivery, verify the quantity, packaging, and packing list. Keep records of the acceptance process for archiving.

    Delivery times are affected by order scheduling, materials, molds, and surface treatment. The specific timeline is subject to confirmation at the time of order placement. For projects that require urgent delivery, it is better to indicate this as early as possible. Whether arrangements can be made depends on the current production capacity and material availability.

    Key Points of This StepDeliver and file as agreed

    "Longde Hardware" Customization Process Diagram: Bulk Packaging, Packing List, and Delivery for Transportation
    “Longde Hardware” Customization Process Diagram · Batch Delivery

The above diagram illustrates the process; the specific scope of services, verification items, and order arrangements are determined according to the product and the agreements between the parties.

QUOTATION / Price quote

What factors can affect the quotation?

Quotation differences usually come from four types of conditions. Listing the conditions on the same table makes them more clearly visible when compared.

Customized Quotation Communication Checklist
factorsInformation to be confirmed
Structure and MoldsSize, drawing version, existing mold conditions, whether it is a new mold setup
Materials and SurfacesMaterials, colors, surface treatments, appearance, and testing requirements
Quantity and DeliverySingle item quantity, color division, packaging, delivery time and location
Inspection and verificationAssembly requirements, dimensional tolerances, testing methods, and acceptance criteria

A formal quotation requires a specific solution, quantity, and acceptance criteria; a single image is usually not sufficient to create a formal quotation.

CHANGES / Modifications

What changes will re-integrate the programme and the offer

It is common to make changes during the project progress. The later the changes are made, the more molds, materials, and schedules will be affected.

  • New mold creation or modification of mold structure, parting and feeding positions
  • Replace the material, color, electroplating, or surface treatment method
  • Significant changes in quantity, or variations in color and size
  • Changes in acceptance criteria, testing methods, or packaging methods
  • Changes to delivery time, location, or shipping methods

These changes may not necessarily cause the project to stop, but they require a reconfirmation of feasibility, sample plans, quotes, and delivery dates. The originally confirmed versions need to be updated simultaneously to avoid discrepancies between production and acceptance.

The quick sample output target is not applicable to all projects; the specific time is determined based on the product, mold, and scheduling.

TO DO LIST / Preparation Checklist

You can prepare these before submitting your requirements.

Even with incomplete information, communication can still take place. Clear photos, physical samples, and hand-drawn dimensions are more helpful than simply saying "follow this example."

Drawings or samples
Mark the version; send the physical samples along with it.
Use
Where it is installed, how it is stressed, whether it needs to be movable or foldable.
Key dimensions
The dimensions, clearances, and tolerances of the mating parts; which dimensions cannot be changed.
Quantity
Single item quantity, color breakdown, and estimated order reorder plan.
Materials and Surfaces
Materials, colors, electroplating, spraying, aging treatments, or other surface requirements.
Packaging and Delivery
Packaging methods, packing requirements, and delivery locations and times.
Acceptance
Appearance standards, functional tests, assembly requirements, and evaluation methods.

LET’S MAKE IT CLEAR

Bring drawings or samples with you.
Evaluate the plan together.

Clearly state the requirements, quantities, and quality standards. This will provide a basis for discussing the manufacturing plan.

Prepare custom requirements

Online submission is not available yet, contact information will be provided later.