FAQ
What hardware fittings does Longde Hardware offer?
The company mainly supplies hardware for handbags and bags, belts and straps, shoes and boots, clothing, and accessories. Common types of products include chains, connecting rings, snap hooks, belt buckles, shoe buckles, zipper pieces, and metal labels. Products can be found by category, style, shape, and customization options.
Reference Website Hardware Product Catalog
What accessories should be chosen for the shoulder straps, the opening of the bag, and the bottom of the bag of a handbag?
For detachable shoulder straps, snap hooks are commonly used for adjusting the length. Center-bar buckles can be used to connect handles or shoulder straps, either with a connecting ring or a bridge fitting. For flip-top bags, zipper locks or pin buckles are recommended, while zippered closures can be equipped with a zipper piece. For the bottom of the bag, foot nails can be used. During prototyping, assemble the hardware components of the same bag together to ensure that the dimensions, opening and closing mechanisms, and colors are coordinated.
Reference Website Types of Handbag Hardware
What materials are commonly used? What surface effects can be achieved?
The material is mainly zinc alloy. The surface treatment includes electroplating, spraying, and laser engraving. The selection of materials and surface effects will be combined with the design, load-bearing capacity, color, and acceptance requirements, and will be determined according to specific plans.
Reference Website Longde Hardware's main products and material processes, Customized Data List
How long does prototyping and sample revision generally take? Under what circumstances is additional evaluation required?
The targets are within 24 elapsed hours for initial samples and 48 elapsed hours for revisions. If the job needs new tooling, construction changes or special materials or finishes, we first review feasibility and scheduling. Timing is confirmed for each project.
Reference Website Home Capability Objectives, Custom Changes and Time Explanation
Is there any actual case where a metal sample was obtained within 24 hours?
Yes. The bow tie decorative button project followed the previous specifications and had its shape adjusted. 3D modeling took about 1 hour. After confirmation by the customer, a printed sample was obtained in about 2 hours for verification. Subsequently, the spin casting process was used to produce a zinc alloy sample within 24 hours.
Reference Website Case of quick prototyping with bowtie decorative buttons
After receiving the sample, what should be checked before the mass production?
First, check the key dimensions, appearance, color, and surface texture. Then, test the sample on bags, belts, or shoes to assess fit and opening mechanisms. The force testing and evaluation criteria are determined according to the intended use. Before confirming the mass production, specify the acceptance criteria for the sample, drawings, and related documents.
Reference Website Prototyping and validation, Prenatal Sample Sealing and Inspection Basis
Can customization begin only with reference to the diagram? What information is required?
It can start with reference drawings, actual samples, or blueprints. Please also provide information on the purpose of the accessories, assembly locations, key dimensions, materials and surface effects, quantity per item, expected delivery time, and acceptance requirements. Based on the available information, the engineering assessment will list the dimensions, locations, or testing requirements that need to be supplemented.
Reference Website Custom Requirements Preparation Instructions
What are the steps involved from submitting a requirement to batch delivery?
The process is as follows: submission of requirements, engineering evaluation, confirmation of plan and quotation, prototyping and verification, small batch production orders, and mass delivery. During the engineering evaluation, it is determined whether the structure and molds are feasible. For production orders, it is necessary to check the consistency of batch colors and surface effects, and to verify the packaging methods. After that, mass production is arranged according to the confirmed plan.
Reference Website Six Steps for Custom Metal Manufacturing
What does a customized quote include? What factors can affect the price?
The quotation usually includes costs for prototyping, mold fees, and unit prices per batch. Delivery conditions are specified separately. Materials, structure, surface treatment, quantity, acceptance tests, and packaging can all affect the costs. When comparing quotes, it is necessary to consider the version of the solution, quantity, and acceptance requirements.
Reference Website Factors Affecting Customized Quotations
Can we place small trial orders first? How should the quantity and delivery time be determined?
Arrangements can be made after the samples are confirmed. For small batches, it is recommended to order no less than 50 pieces per item. The delivery time for small orders is within 7 working days. The actual quantity and delivery time will be determined based on the style, color, craftsmanship, and production arrangements.
Reference Website Trial order and small order delivery targets, Small batch trial order arrangement
Where is the factory of Longde Hardware? Where can I see the actual site?
The factory is located at Room 103, Building 2, No. 3, Sangyuan Street, Chenwu, Houjie, Dongguan City, Guangdong Province. Public photos of the factory’s entrance, processing equipment, mold rooms, assembly stations, and storage areas are available. The SMETA audit documents from 2025 also include the address of this site and the scope of the audit.
Reference Website Actual photos of the production workshop, SMETA Site Audit
Which processes are carried out on-site? How are electroplating and polishing arranged?
In the factory, there are processes for die casting, machining and finishing, die casting, grinding, assembly, quality inspection, and storage. The SMETA audit documents for 2025 describe the die casting, cleaning, inspection, assembly, and packaging processes at the audit site. It also indicates the external arrangements for electroplating and polishing in 2024. The specific procedures for individual orders can be confirmed according to the product plan.
Reference Website Internal processes and workshop areas, Review of on-site procedures and outsourcing arrangements in the audit records
How is a hardware buckle developed from a design drawing to a finished product?
Taking decorative buckles as an example, the process involves first confirming the drawings, making steel molds, then die-casting the shape, sorting and removing the sprue. Subsequently, the burrs are removed by grinding, the surface is polished, manual processing is carried out according to the structure, followed by electroplating and protection. Finally, quality inspection and packaging are performed. The processing steps for each product are determined according to the product plan.
Reference Website The nine production steps of hardware decorative buckles
How to protect decorative buttons after electroplating to reduce scratches during transportation?
The decorative buckle is plated and then air-dried and inspected. After that, it is sprayed with a special oil and baked to add a protective layer to the surface. After passing the quality inspection, it is separated with pearl cotton and wrapped individually to reduce the risk of collision and scratching during transportation.
Reference Website Electroplating and Protection, Quality Inspection and Packaging
What are the standards for large item inspection? How are quality checks carried out during production?
Before shipment, the customer signs to confirm the pre-production samples and seals them. The appearance, color, and quality are compared with the sealed samples. The dimensions and structure are verified against the confirmed drawings or 3D data. Inspection is carried out at different stages of the material receipt, manufacturing process, finished product, and shipment. The inspection level and acceptance criteria for the sampled shipments are determined according to the order specifications.
Reference Website Sample sealing, segment-based inspection, and shipment sampling
How to inspect the appearance, dimensions, and opening and closing functions of fasteners?
When there are visible scratches on the main visible surface, remove the part for rework and inspect for sharp burrs and peeling of the plated coating. The absolute values of key assembly dimension deviations listed on the quality inspection page are less than 0.10 mm. For fasteners with movable structures, check the opening and closing performance and elasticity. The function should remain normal after being opened and closed 100 times. The applicable items are carried out according to the confirmed samples, drawings, and order requirements.
Reference Website Visual inspection standards, Dimensional and functional inspection standards
How can we check the durability of the electroplated layer?
The quality inspection will evaluate the thickness, adhesion, friction resistance, and corrosion resistance of the plated coating. Salt spray testing is used to observe whether white rust or corrosion occurs under specified conditions. The testing conditions and criteria are determined according to the order specifications.
Reference Website Reliability testing of plated coatings and surface treatments
Can third-party testing be arranged? What reports are available for reference?
Third-party testing can be arranged according to the order. The items to be tested and the costs will be confirmed during the quotation process. The website also provides information about SGS’s testing of lead content in YK11228 fasteners, as well as Intertek’s testing of cadmium, lead, arsenic, and nickel releases in LD20618 zinc alloy samples. The test results are applicable to the samples being tested.
Reference Website Third-party testing arrangement, SGS lead content testing, Tianxiang Four Chemical Tests
What cooperative client brands has Longde Hardware disclosed?
The public list includes FRITZC, LIU.JO, LA MARTINA, BELE, MO&CO, GUESS, NINEWIST, LONDON, BIKKEMBERGS, SKAP, SKECHERS, ARMANI, MANGO, and POLO CLUB. For details on specific cooperation products, projects, and supply ranges, please refer to the actual project communications.
Reference Website List of Partner Brand Clients
Can I refer to small-scale customization cases with overseas customers?
Yes. An overseas customer requested a custom-made light golden metal button, with the requirement to control the height of the shank and maintain the edge holes. Longde Hardware produced a sample using 3D printing for the customer to review the appearance and fit. The order took 15 calendar days from inquiry to delivery, and 8 calendar days from quotation to delivery.
Reference Website Case of Overseas Small Batch Metal Button Orders
Why are the company names and addresses on the historical inspection reports different from the current ones?
The terms used in the SGS report for 2021 and the Intertek report for 2022, LONDON HARDWARE JEWELRY CO., LTD. and YOKAI ORNAMENT CO., LTD., are former names of Longde Hardware. Both reports use the former address of Hetian No. 2 Industrial Area, Hetian Village, Houjie Town.
Reference Website Applicant and address for SGS report, Applicant and Address of Tianxiang Report
To trace the acceptance and delivery of a batch of goods, which records can be checked?
The pre-production sample and drawing verification for acceptance can be confirmed with the customer's signature. The sampling quantity, inspection level, and acceptance requirements for each batch are verified using the shipment sampling plan. At the time of delivery, the quantity, packaging, packing list, and archived acceptance records should be checked against each other.
Reference Website Sample sealing, sampling inspection, and traceability, Batch delivery and acceptance documentation